Posts Tagged ‘HFR’

[MIDI] Nomico – Skip! (Moetan ED) [SC-88Pro] (60FPS)

Tuesday, August 11th, 2015

Here’s the Roland SC-88Pro synth being pushed quite hard by the power of moe (ending theme of the anime Moetan, “Skip!”, originally sung by Nomico, to my surprise). MIDITrail’s fancy 3D view is good for notes, but doesn’t show any control changes, so I included a scrolling view of those, too, next to the synth’s display. And hey, why not 60FPS for those who can view that? =)

[Watch in HD]

This MIDI took me about 5 days to make, plus a few hours of tweaking at the end. It sounded like it was nearly finished after 2 days, but the hardest stuff was still left to do at that point (I do hate struggling to transcribe barely-audible parts, but they really fill in the gaps and make it sound complete).

Firsts for me include the fast arpeggio effect (surprisingly, the 88P never complained about this), wah effect on the quiet guitar (on the right), and gratuitous use of “All Sound Off” whenever possible, to try to keep things running quickly enough. Also, 4 sound effects I’ve never used before!

3 channels get re-used for different instruments (16 channels has never been so insufficient), but more annoyingly, the synth’s update speed drops really low during the chorus because of all the playing voices, making pitch-bends sound jumpy, and it took a lot of tweaking and quite some luck to get a clean recording. I kind of wonder if it’s just my 88P which slows down so much when many notes are playing (even if there are not many MIDI messsages), or if it’s simply a limitation of its CPU speed. It might just be a coincidence, but it seemed to handle it better immediately after power-up, so perhaps it becomes worse as it gets hotter. In that case, maybe I could attach a heat sink to the CPU, or just put a fan in there (I don’t really want to drill holes, though). The case doesn’t really get very hot, though. I kind of wish I could limit it to playing only 32 voices at once, instead of letting it struggle with 64. Lowering release times only gets you so far.

Somehow, the fact that an anime of Moetan had been made eluded me for 8 years and I only recently discovered it. “YOU MAGGOTS ARE HUFFING AND PUFFING–” oh wait, wrong English-teaching mahou shoujo.

DIY Printer P7: Printing for the first time!

Monday, April 13th, 2015

It actually works! Well, its first ever print-out could certainly do with some improvements, but to be honest, I’m happy it’s even intelligible at all! Part 7 in my super-basic, Arduino-controlled printer project.

[Watch in HD]

It should be better when I at least have a stable and level tray for the paper (or whatever) to sit on. I have an idea for an alternative to a heavy sheet of steel, which you should be able to see in the next video. Perhaps the PSU fan will have arrived by then, too… <_<

Also, enjoy the in-sync 50 FPS if you can! That pen flicks back and forth at stupid speeds, so a high frame rate is actually useful here.

DIY Printer P5: Downdate (and 50FPS test)

Saturday, March 14th, 2015

The most boring video in this series of me making a super-basic, Arduino-controlled printer. I made it at 50 FPS to try to make it more interesting to people who can play that, but that ended up making it out-of-sync at times. *Sigh*

[Watch in HD]

This is what happens when I don’t plan everything through before I start making something (i.e. all the time). Sorry. Stuff will actually happen in the next one, I promise!